Forum

Key Fob repair car key remote: Replacing the Battery

Getting jostled around in pockets and purses keys fobs can be damaged and not register presses accurately. This problem can be fixed by replacing the small battery that is usually found in the snap-out case of the majority of car fobs.

But, a new one could not be able to revive your key fob if its internal switch contacts are worn out. This is a simple fix you can do at home.

Replace the Battery

It could be time to change the battery in your key fob if it is slow or takes longer to unlock or lock your vehicle than usual. The replacement of a key fob's battery is one of the easy tasks you can complete yourself. This is a straightforward fix that will save you money on a trip to the dealership or locksmith.

You can purchase a coin-style (CR2032) battery at any auto parts, home improvement, or general store. Key fobs come with slots for these batteries and it is easy to replace the battery. Depending on the manufacturer you might need to use a screwdriver in order to open the compartment.

If your key fob comes with clips that hold the batteries in place, remove them using your fingers or with non-metallic tools. Remove the old battery and replace it with a new one, being careful to note its orientation to ensure that you put it in the correct place. It is important to avoid touching the batteries' flat surfaces since scratches from fingers can decrease their lifespan.

Close the case of the key fob and test its function by pressing the button. If the key fob does not work, you'll need to open it again and ensure that the battery is inserted correctly.

It is also possible that a simple replacement of the battery will not be enough to resolve the issue, like physical or electrical trauma. In that situation, you'll need bring your key fob into the dealership or service center for repair. Before you do this, there are four issues that the replacement battery can't fix. You should be aware of these issues to be able to seek help from a qualified technician if needed. You can also learn how to fix the defective transmitter of a key fob to determine the reason why it's not working.

Clean the Contacts

It is essential to keep your key fobs clean to maintain their functionality and longevity. Over time the natural oils on your fingers and pockets can build up in the key fob's buttons and in the crevices. This can cause keys to not function. All you require is rubbing alcohol, a cotton swab and some rubbing alcool.

First, open up the key fob by popping the lid off with an instrument or coin and gently removing the battery. Make sure you note the type of battery it is (negative and positive sides) to ensure that you insert it again correctly after you are finished.

Then you can make use of a cotton swab (or a small brush) to clean the buttons and the surrounding areas of the fob. Pay particular attention to the contacts of the battery and make sure they are clean. Once you are done, make sure to let the fob and its components dry completely.

If your device doesn't function after cleaning it, it may be an ideal idea to reset the system. Check the owner's manual for instructions on how to do this and follow them accordingly. If the key fob was just dead, this may be enough to bring it back to life.

It is important to maintain the key fob in good condition after it has been cleaned and synchronized. By regularly wiping it clean with a damp cloth and gentle soap, you can ensure that your key fob will function well for many long time to come.

Reset the System

Despite the fact that today's modern-day key fobs are more efficient and secure than ever before, it's possible to encounter certain problems. Most of the time these issues aren’t serious or complex and can be resolved with simple solutions, like changing the battery. If the problem is more severe or if the issue cannot be resolved with simple methods, a professional auto repair shop can replace and reprogram the key fob.

The ability to lock or unlock using the key fob is the principal purpose of the device but it can also be used to enable certain car features. The key fob can be used to lower or lift the sunroof. This feature is useful when you have to open the roof while stuck in traffic or when your hands are full. In the same way, the key fob can be used to summon your car when it is stuck in a parking location.

The internal circuitry of a key fob and buttons could fail due to manufacturing defects or wear and tear. The signs are erratic behavior or an inability to lock or unlock the car. Sometimes moisture, as well as other sources of electromagnetic interference could interfere with the operation of the key fob. If your key fob has been contaminated with dust or has been wet, it needs to be cleaned prior to attempting to use it again.

If the device continues to behave in a strange manner after replacing the key fob or cleaning the contacts, you might have to perform an initial reset. This will eliminate system bugs and restore the performance of the device.

If you're unsure how to do a factory reset on your device, consult the official website of the manufacturer or the owner's manual. Certain devices require specialized tools to reset them, but you'll need to find the correct instructions specific to your model.

Another option to resolve problems with your key fob is to call an Apache Junction mobile car locksmith. They are able to replace and program key fobs on almost all makes of cars. In addition, they can also repair car keys with chips in them.